Home Mobiles Xiaomi How to Setup Mi WiFi Repeater/Amplifier with Other Routers

How to Setup Mi WiFi Repeater/Amplifier with Other Routers

Mi Repeater Mi Power BankXiaomi’s little USB powered WiFi Repeater (some call it WiFI Amplifier) is a cheap and powerful tool to extend the range of WiFi networks. One downside is that (officially) it is only compatible with Xiaomi’s own routers and there is no documentation provided by Xiaomi to make the WiFi Repeater work with other routers. But there is a quick and easy way to make the repeater work with just any router, here’s how.

Setting Up Mi Repeater with non-Mi Routers

  1. Connect the WiFi Repeater to a power source. You can plug it into a USB port on a PC, a power bank or even a USB wall charger. When powered, the repeater’s LED will start blinking in orange color.
  2. Download and install the Mi Home app on your Android smartphone.
    The app can be downloaded from the Play Store by searching for MiHome or opening this link.
  3. Launch the Mi Home app and choose China Mainland as the region. This will make the app open in Chinese, but is more likely to connect to your WiFi Repeater.
  4. Tap on the + (Plus) sign at the top right. You can also tap the notification about 1 smart devices found.
  5. Depending on what is displayed, Select Mi Network Extender6f5c or other smart devices6f5c. If nothing is displayed, consider resetting your WiFi repeater by inserting a pin into the reset hole.MI repeater new Device
  6. At this point, you’ll be asked to login to your Mi (Xiaomi) account. Sign in if you already have one, else create a new account and sign in.
  7. Choose the network you wish to extend using the repeater and enter the original password for the same.
  8. Wait for Mi Home app to configure the WiFi Repeater to connect and extend your WiFi network. The LED light on the repeater will change from orange to blue indicating a successful setup.mi home connecting
    If the Mi Home app throws an error during setup but your repeater has a blue LED already, you can simply ignore the error. The repeater will work fine 🙂

The SSID for your extended network would have your original network’s SSID followed by _plus. The password for the network will remain same as your original. This can be altered by following the steps below:

Additional Configuration of Mi WiFi Repeater

Once successfully connected, you will be able to manage additional settings for the WiFi repeater such as changing the SSID, its password or hiding it. Just tap on the Mi Network Extender on the homepage of Mi Home app.

Mi WiFi Repeater Settings
Additional Settings (Click to Enlarge)

Set Network Name to Same as Original

Turn on the toggle in front of option 1 (as shown in the image above).
This will make the repeater use the same SSID and password for the network and hence will only be detected where the original network is not accessible.

Change SSID, Password or Hide SSID

Tap on the option 2 shown in the image above and then look at the image below.

mi repeater change ssid
Change SSID/Password
  • First field is the SSID
  • Second field is the password
  • Turning on the latter toggle will hide the SSID and you will be needed to manually add it to the device you want to connect.

Check the Clients connected to Repeater

Connected Devices Mi Repeater
Connected Clients

Tapping on the option 3 in first image will present a list of devices currently connected to the repeater’s network. You can view the Mac address and the respective IP address. However, no block or speed limiting functions are available.

If you have any other concern regarding the Mi Amplifier, consider leaving it in the comments section below. You can also post in our forums or message our Facebook page for a faster response.

About the author

Narender Singh

A student of Business who loves IT. Has a soft corner for Nokia, but tries his best to not bring the bias to this blog.
Generally, avoids news and spends his time writing guides and tutorials which add value to the web.

211 Comments

Click here to post a comment

Email me when somebody replies to my comment.

        • Yep that was just I was going to recommend. Unless it is an international version of the Repeater, always use the Chinese server.
          Anyways, good that it is working for you now 😀

  • Can you help me about the change the wifi setting, Because i dont want to samename with plus , i want to change SSID and password. There is section but i cant touch these sections ????

    thanks for help from now .

  • Hi please help, I have successfully paired my xiaomi repeater 2 with my home router/modem using mi home app, yellow light turned to blue, I used mainlad china as location and set my security with wpa2 aes. My problem is, my devices cant connect to the repeater/internet, whenever I’m connecting, its stuck in obtaining IP address.

  • hi there, do you know how to connect the wifi repeater with public network eg. university wifi. the mijia app said ‘public network is not supported. connect to your home network’. i bought this due to bad connection in my room so i hope you can help, thanks

  • I kept on getting the “Connection timed out” message and my LED light is still blinking orange. I have already reset the repeater and did the whole thing again but still get the same message. Why is this so? What has gone wrong?

  • Thank you, helped a lot. I did what you said and finally i could make the conecction, but even without it the repeater was working, but i couldnt control when needed.

  • Can I extend and connect ISP’s Wifi network If it only allows my Phone’s MAC?Or I will have to change mac address from phone’s to repeater’s mac?

  • I’ve read about roaming mode in this device.
    could you explain how can I setup device in this mode.

    I want have only 1 SSID and extend range of my main wifi not repeat my main wifi with plus. in this mode I have 2 SSID.

  • I tried as you explained, but it didn’t work. Every time it tries to connect, goes up to 89%and then shows connection time out. I am using Asus modem router. Please suggest to solve this problem.

  • I think it doesn’t work if security mode of original non mi router is set to Wpa/psk. Can you list the modes that it supports?

    • Well, the MiHome was recently updated to make Chinese available for the WiFi repeater as well. So you should be good to go 🙂

  • Hi. I have connection time out error at90% and the led is still blinking yellow.my device is is note4 and network is wpa2 and is set to mainland china.any suggestions?

        • Hi Ali,
          I had the same problem. After changing the WPA Mode in the router settings from “WPA/WPA2” to “WPA2(CCMP)” the connection was established without a problem.
          After this first initialization it’s no problem to switch back router settings to “WPA/WPA2”
          Hope this helps

  • can you or anyone help me, i have cctv that connect to cisco router via this mi amplifier/extender, in my cctv i set it fix ip 192.168.0.23, at router i have rule for my cctv mac address to fix ip also 192.168.0.23, but when connect to mi amplifier/extender i get 2 ip address 192.168.0.10 for the mi device itself and get ip address for my cctv 192.168.0.13

    but if i use fing network tools app on android, i can see that actually i have 3 ip, 1 for mi 192.168.0.10 and 2 for my cctv 192.168.0.13 and 192.168.0.23, unfortunately, my network video recorder knowing my cctv ip 192.168.0.13 (and its can be like dynamic ip)

    can i fix this problem so i can only have 1 ip on my cctv like i set on my cctv and on my cisco router rule

    thanks a lot for your attention

Connect with Us

You can follow us on these social media networks and stay updated.

Get more stuff

Subscribe to our mailing list and get interesting stuff and updates to your email inbox.

Get more stuff like this
in your inbox

Subscribe to our mailing list and get interesting stuff and updates to your email inbox.